ECJ-2FB1C475K MLCC For Decoupling And Ripple Control

Decoupling performance depends on placement as much as capacitance. ECJ-2FB1C475K is a multilayer ceramic capacitor rated at 4.7 µF and ±10% tolerance, using an X5R dielectric, which makes it useful for local energy storage and ripple reduction near loads. It’s commonly applied on DC rails where fast current steps can cause droop, noise, or resets. Use ECJ-2FB1C475K at the output of a regulator, near a driver stage, or close to an IC that has burst current draw. Keep the connection to ground short and direct, and avoid narrow neck-down traces that add series impedance. Add a smaller-value ceramic nearby if you need better high-frequency suppression. Request a quote for ECJ-2FB1C475K.